In need of a quick renovation?

Mammoth’s Interlock Wood Tiles are your perfect choice to refurbish any living space, indoor or outdoor. Its snap locking design allows DIYers to easily and economically install the tiles to pre-existing flooring. Give that hardwood decor feel to your backyard, patio, basement, or even bathroom!

Easy To Install

No Tools Required! Super Easy to Install, Push Connectors together and It’s Done! For an enhanced look, trim the plastic connector edges off with a cutter.

What’s Included

11 STRIPE Teak Wood Tiles

Buyer Case Examples – Please measure the surface area before buying. Each tile is 1’x1′, equating to1 sq/ft.

– Balcony 10’x4′ (40sq/ft) – 4 boxes

– Outdoor Deck 18’x11′ (198sq/ft) – 18 boxes

– Sauna Room 9’x8′ (72sq/ft) – 7 boxes

– Bathroom 4’x5′ (20sq/ft) – 2 boxes

Once you have the layout designed, it is time to prepare the surface.

Hard Surfaces (Concrete, Asphalt, Cement, etc.)- There should be no large cracks, bumps or depressions which could cause the tiles to lie unevenly. If the surface is rough or cracked, it’s advisable to level the surface with a suitable exterior patching compound prior to installation.

Soft Surfaces (Dirt, Sand, Gravel, etc.)- The surface should be leveled, well compacted and then covered with a weed control barrier.

As a general rule, it is suggested the surface should normally slope slightly away from the outer wall of any structures for good drainage under the tiles.

Laying The Tiles

Lay your tiles from an outer corner of the area you want to cover and work inwards diagonally towards the exterior wall. Push down firmly so the tiles lock together. When approaching the end of your area, some tiles may need cutting to fit in the remaining gaps. You may use a handsaw or power saw to cut the tiles. 

Future Maintenance

Our teak wood tiles’ color is 100% natural, so future staining applications are not required, reducing the cost and labor of maintenance. In addition, we have coated the wood with a layer of sealer at the factory to provide a resistant coating against weatherization. It is recommended to apply a new layer of sealer every 12-24 months to the deck tiles after installation. The time range depends on the climatic conditions, the degree of exposure to sun and rain, and the recommendations of the decking sealer manufacturer. Note that over time the teak wood color will slightly darken into a milky chocolate color if a sealer is not applied.